Native Instruments Absynth 5 - Resonators; Parameters

ABSYNTH 5 Reference Manual – 96
6.6 Resonators
Resonators effects
The effect type Resonators offers access to three “resonating bodies” (Resonators). These
Resonators can produce delay- and hall-effects, or simulate the sound of specic objects
such as metal bars, brake drums and bottles.
ABSYNTH 5 actually offers you three Resonators, which allows you to combine many differ-
ent effects. Imagine for example an almost innite hall-like effect, accompanied by a shorter,
brighter sounding Room effect.
6.6.1 Parameters
Master Section
• Sizecontrol: Sets the maximum delay-length between 0% and 100%.
• Feedbackcontrol: Controls the feedback amount (from 0 to 100).
• Tonecontrol: Controls the lters inside the resonators. The effect depends on which fea-
ture is selected in the Mode menu (see below).
• Drivecontrol: Regulates the input level. This parameter determines the input signal’s
degree of saturation. If a high input level distorts the signal, the resonators react differ-
ently to when stimulated by a clean signal. This is a very powerful setting, since it also
affects all other parameters.