ABSYNTH 5 Reference Manual – 200
14.2 Effect Categories
14.2.1 Type
Describes the basic effect characteristics.
•
Delay: An echo effect that adds one or more delayed versions of the original signal to the
sound.
•
Chorus: An effect that mixes a very slightly delayed and pitch-shifted version of the input
signal with the original input signal.
•
Phaser/Flanger: All kinds of effects using a comb lter (delay-line) to generate phase
shifting and cancellation thus creating, a phasing or anging sound.
• Reverb: All effects creating an obvious room ambience.
• Filter/EQ: All types of effects which modify a sound’s harmonics.
•
Dynamics: Effects that manipulate the input signal’s dynamic range such as compressor,
limiter or expander.
•
Enhancer: All types of effects that enhance the sound through psycho-acoustic means,
e.g., to add brilliance and/or depth.
•
Vocoder: Effects based on traditional vocoder technology where the signal present at one
input modulates the signal present at another input.
•
Distortion: All types of effects that distort the incoming signal, from discreet to heavy
distortion.
•
Resonator: A special effect containing a (comb) lter that rings at a resonant frequency
when it is excited by an input signal. A short input pulse creates a signicantly longer
decaying oscillation at the output.
•
Lo-Fi: An effect that creates lo- sounds from the incoming signal, like a bit or sample
rate reducer.
•
PitchShift: All effects altering the pitch of a sound without affecting the playback tempo.
• Gate/NR: All types of gate and noise reduction effects.
• Panning: Effects that modulate the incoming signal’s stereo/surround placement.
To Next Page
Loading...
Need help?
General