Native Instruments Absynth 5 User Manual

ABSYNTH 5 Reference Manual – 53
• SaveChannelTemplate: Allows you to save the current Channel settings as a Template in
the Universal Library. In the dialog that opens, choose the name and saving location for
the Template, then click then on “OK” to save the Template.
• MutateOscil: Applies a Mutation to that particular Oscillator.
• RetryMutateOscil: Retries the Mutation for that particular Oscillator.
For the last two entries, the Mutation settings are those dened in the Browser’s Mutaton
section (see section 11.3, “Mutator”, for more on this).
5.4.3 Single Mode
Oscillator in Single mode
In the Single mode, a single main oscillator is active.
The Main panel contains all parameters controlling the main oscillator:
• Synthesismenu: Selects the desired synthesis process (see section 5.4.1 “Oscillator’s
Panels and Tabs” above for details).
• WaveformSelector: A click on the Waveform Selector opens the Waveform Selection dia-
log where you can select the Waveform for the Oscillator (see section 5.3.1, “Waveform
Selector and Waveform Selection dialog”, above for details).
• Anti-Aliasswitch: Turns the anti-aliasing on and off (see section 5.3.3 “Anti-Alias Switch”
above for details).
• FrequencymenuandFrequencycontrol: Enables you to enter the oscillator’s frequency as
a transposition of the played note (Trans), as a relationship (Ratio) with the played note,
as a xed Frequency (Hz) or via a xed MIDI note (Note). See section 5.3.2, “Frequency
Menu and Frequency Control”, above for details.

Native Instruments Absynth 5 Specifications

General

Brand	Native Instruments
Model	Absynth 5
Category	Synthesizer
Language	English