ABSYNTH 5 Reference Manual – 49
5.3.4 Phase Inverter
The Phase Inverter is available in all Oscillator‘s synthesis modes based on a wavetable. When
activated, it simply inverses the phase of the signal generated by the oscillator – in other
terms, it shifts the phase by 180°.
5.4 Oscillator Module
Oscillator module
The three Oscillator modules are the only sound sources in ABSYNTH 5. All other modules
only modify the sounds produced by the Oscillators. If none of the Oscillators are turned on,
you will hear no sound, and none of the other modules can be activated. Accordingly, the
modules of a Channel are only available when its Oscillator is active.
The Oscillators can run in numerous different operating modes, which primarily differentiate
by their synthesis process. In the following sections, you will learn more about these individual
operating modes. But we will rst present the general layout and common features for all
Oscillators.
The Oscillator can be inserted into the rst Module Slot at the top of each Channel A, B or
C of the Patch Window.
To activate an Oscillator module, do the following:
► Click on the extended left margin of the desired Module Slot to activate it.
To Next Page
Loading...
Need help?
General