Native Instruments Absynth 5 - Surround Page

ABSYNTH 5 Reference Manual – 24
• SamplesDirectories: These three elds allow you to set paths to the directories contain-
ing the samples used by your Sounds. To dene a path, click on the Browse button under
one of the elds, navigate to the desired folder on your hard drive and click “OK.”
• TemplateLibrariesDirectory: This eld allows you to set the path for the directory contain-
ing your various Templates (Envelopes, Waveforms, modules, Channels…). To change the
path, click on the Browse button under the eld, navigate to the desired folder on your
hard drive and click on “OK.” For more info on the Templates, please refer to section
5.2.3 “Universal Library.”
• Autobalancepatchchannels: If this option is enabled, ABSYNTH 5 controls the output
of the three individual Channels in the Patch Window so that the main output remains
constant and do not clip. That is, if you were to increase the level of one Channel,
ABSYNTH 5 would automatically decrease the levels of the two other Channels.
• Autorenamecontrolmacroonrstassignment: If this option is enabled, a Macro Control
that has had a parameter assigned to it takes over the name of this parameter – but only
if no other parameters have already been assigned to it.
3.4.2 Surround Page
The Surround page allows you to congure ABSYNTH5’s surround output channels.
The Surround page of the Options dialog