ABSYNTH 5 Reference Manual – 148
For every parameter assigned to a Macro Control you can use the following setting:
•
Depth%control: determine the depth of the Modulation carried out by the Macro Control
as a percentage of the current value of the parameter under its control.
•
Lag: determines the delay with which the parameter reacts to the changes in value com-
municated by the Macro Control.
•
Inversionswitch(Inv): reverses the direction of the Modulation. High Controller values
produce a low parameter value, low Controller values lead to high parameter values.
10.5 MIDI Page
Midi page
On the pages Controllers and Assignments, MIDI has been limited to issues concerning Control
Change Information. On the MIDI Page, you can set the remaining MIDI parameters and as-
sign functions to MIDI control elements.
10.5.1 Pitchbend
In this section, you can set how a Preset reacts to Pitchbend information: In Depth control you
can limit the region of upward and downward Pitchbendings on a set number of halftones. In
Lag control you can determine the delay (in milliseconds) with which ABSYNTH 5 evaluates
the incoming Pitchbend information for this Preset.
To Next Page
Loading...
Need help?
General