ABSYNTH 5 Reference Manual – 21
• ImportGloBank…: Opens a dialog labeled Please select a glo bank to import… allowing
you to import Sounds made with older versions of ABSYNTH into ABSYNTH 5. Navigate
to the desired Glo bank on your hard drive, select it and click on “Open”. You can then
scroll through the list of Sounds available in this bank. The Sound selected in the list is
automatically loaded in ABSYNTH 5 and you can play it. Should you wish to convert this
Sound into an ABSYNTH 5 KORE SOUND®, you can save it like any other Sound via the
Save/Save As… commands explained above.
!
The Factory Contents of all previous versions of ABSYNTH have already been converted
and are directly available via the Browser Window. Thus, you need this command for User
Sounds only!
• Options…: Opens the Options dialog, which will be explained in detail later (see section
3.4 “Options Dialog” below).
•
AudioandMIDISettings…: Opens the Audio and MIDI Settings dialog allowing you to
adapt ABSYNTH 5 to your custom studio or live setup. The audio and MIDI settings are
explained in detail in the Getting Started guide.
•
Exit: Quits the application. Please check that you saved your Sound before closing. I you
did not, unsaved changes will be lost!
To Next Page
Loading...