Native Instruments Absynth 5 User Manual

ABSYNTH 5 Reference Manual – 66
Freqshift Feedback Mode
When this mode is selected in the upper Feedback Mode menu of the Feedback panel, the
signal in the feedback loop is processed by a mini-Freqshifter. Hence, the parameters in the
lower part the Feedback panel are very similar to those of its big brother, the Modulator in
Freq Shift mode.
The few differences are listed here:
• An Anti-Alias switch appears at the top left corner (for more info on the Anti-Alias switch,
see section 5.3.3, “Anti-Alias Switch”).
• The Feedback control from the Modulator module in Freq Shift mode was replaced with
a Mix control, which denes the proportion of signal processed by the Freq Shifter.
The rest is exactly the same as in the Modulator module in Freq Shift mode. Please refer to
section 5.6.3, “Frequency Shift”, for more info on its principle, functioning and parameters.
Ringmod Feedback Mode
When this mode is selected in the upper Feedback Mode menu of the Feedback panel, the
signal in the feedback loop is processed by a mini-Modulator module in Ringmod mode. Hence,
the parameters in the lower part the Feedback panel are very similar to those of its big brother.
The few differences are listed here:
• An Anti-Alias switch appears at the top left corner (for more info on the Anti-Alias switch,
see section 5.3.3, “Anti-Alias Switch”).
• The Balance control from the Modulator module in Ringmod mode was replaced with a
Mix control, which denes the proportion of signal processed by the Ring Modulator.
The rest is exactly the same as in the Modulator module in Ringmod mode. Please refer to
section 5.6.2, “Ring Modulation”, for more info on its principle, functioning and parameters.

Native Instruments Absynth 5 Specifications

General

Brand	Native Instruments
Model	Absynth 5
Category	Synthesizer
Language	English