ABSYNTH 5 Reference Manual – 91
Comb Section
• On/Offswitch: Allows each of the six comb lters to be turned on or off.
•
Timecontrol: Denes the frequency (and hence the delay time) of the respective comb
lter. This is measured in percentage, and correlates to the value you have selected in
the Master Time control.
•
Sensitivitycontrol: Denes (as a percentage) how the Macro Control‘s control signal af-
fects the Time control of the comb lter.
•
Inversionswitch: If you turn on the Inversion switch, you invert the effect of the Macro
Control’s control signal (see the section on Modulation und Sensitivity control).
•
Feedbackcontrol:Establishes the feedback signals’ level of every individual lter as a
percentage, which correlates to the value you choose in the Master Feedback control.
•
Lowpasscontrol: Controls the cut-off frequency of each Lowpass lter. This is measured
in percent, which again correlates to the value set forth in the Master Lowpass control.
•
Gaincontrol: Determines the level of each respective comb lter signal at the output
signal in dB.
•
Pancontrol: Positions the signal of the respective comb lter within the panorama of the
output signal. The value 0 corresponds to the position on the extreme left and 1 corre-
sponds to the position on the extreme right. 0.5 corresponds to the middle position.
To Next Page
Loading...
Need help?
General