7197 Series II Owner’s Guide Chapter 6: Commands
August 2011
159
In order to express AI in HRI, AI is surrounded by the bracket and printed.
Because this
parenthesis needs to distinguish from the usual data, it is necessary to use special data.
In the case of Expanded and Expanded stacked, C/D is used for only HRI characters
printing. Even if the input data including wrong C/D is received, the printer prints the
data without correction.
In the case of Expanded and Expanded stacked, when attaching the bracket to AI in HRI, it
is necessary to transmit data as follows.
Fig. about special data
Transmit data from HOST
Special
Data
ASCII Hex Decimal
use
( { + ( 7B + 28 123 + 40 to express AI in HRI
) { + ) 7B + 29 123 + 41 to express AI in HRI
FNC1 { + 1 7B + 31 123 + 49 to recognize the end
of variable length data
To Next Page
Loading...
