7197 Series II Owner’s Manual Chapter 2: Setting Up and Using the Printer
11 September 2011
Wall mounted
The 7197 Series II Series II printer may be mounted on a vertical wall with Wall Mount Kit
(Option). Make sure there is enough room to open the receipt cover to change the paper. Mount the
screws on the wall using the following recommended mount dimensions. Use a #8 wood screw
which is to be securely fastened to a wall stud or using a “Molly” fastener (not provided).
3.5 ~ 4 mm
(.138 – .160 in.)
Screw
128 mm (5.04 in..)
121mm (4.75 in.)
Wall
To Next Page
Loading...
Need help?
General
