NCR 7197 II SERIES - RS-232 C Technical Specifications; Setting Extra RS-232 C Options

7197 Series II Owner’s Manual Chapter 5: Communication
August 2011
35
RS-232C Technical Specifications
This section describes the pin settings for the connectors and the RS-232C interface
parameters. The RS-232C parameters are selectable in the Diagnostic mode. See
“Diagnostics: Communications Interface Settings” in chapter 4 for the position of the DIP
switches. The RS-232C parameters must match those of the host.
Setting Extra RS-232C Options
The following extra options are available for the RS-232C Interface:
 Data errors
 Print “?” for data errors (default)
 Ignore data errors