EasyManuals Logo

NCR 7197 II SERIES User Manual

NCR 7197 II SERIES
308 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #233 background imageLoading...
Page #233 background image
7197 Service Manual Appendix C: Ordering Paper and Supplies
August 2011
208
TCP/IP Setting
IP setting
Items
Default value Detail
IP Address
192.168.1.1
Set Printer IP Address.
This IP Address is effective when Get IP Address is Manual.
Subnet Mask
255.255.255.0
Set Printer Subnet Mask.
This Subnet Mask Address is effective when Get IP Address is Manual.
Default Gateway
0.0.0.0
Set Printer Default Gateway.
This Subnet Mask Address is effective when Get IP Address is Manual.
Get IP Address
Manual
Select method of acquiring IP Address.
Selectable method is Manual or DHCP base on the Printer Dip Switch
Setting.
If Printer Dip Switch 1 OFF and Dip Switch 2 OFF, Manual mode selected
If Printer Dip Switch 1 ON and Dip Switch 2 ON, DHCP mode selected
DHCP IP Address
0.0.0.0
Set requesting specific IP address to DHCP server.
If set 0.0.0.0, DHCP sever allocates printer IP address automatically.
Note
IP address that cannot be set with Ethernet model printer is
a. 255.255.255.255 (Broad cast address)
b. Local loopback address
127.***.***.*** ( This is IP Address to send to oneself )
( "***" is any value from 0 to 255 )

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NCR 7197 II SERIES and is the answer not in the manual?

NCR 7197 II SERIES Specifications

General IconGeneral
BrandNCR
Model7197 II SERIES
CategoryPrinter
LanguageEnglish

Related product manuals