7197 Service Manual Appendix C: Ordering Paper and Supplies
August 2011
215
Thermal Receipt Station
Noise
57 dBA Sound Pressure (ISO 7779)
Graphics (Optional)
User-Defined Graphics, Logo
ECO
Paper reduction, Power reduction
Other
No Reverse Paper Feed
Paper Diameter
80 mm Max.
Paper Length
83 Meters (273 feet)
Paper Width
80 mm +0.5mm /-1.2mm
(3.15 Inches +0.02Inches/-0.047 Inches)
58 mm +0.5mm / -1mm
(2.28 Inches +0.02Inches/-0.039)
Paper Thickness
Not Applicable
Printable Area
2.83 Inches (Max.)
Power Requirements
The 7197 Series II printer receives power from a separate power supply. Here are the
voltage requirements for the power supply.
Maximum Current
Voltage Station Short Term Long Term
24.0 V ± 10% Receipt 6.5 Amps 3.15 Amps
Environmental Conditions
Operating Temperature
5°C to 20°C (40°F to 120°F), models with knife
Operating Humidity
5% to 90%
Condensation may occur when equipment is transferred from cold to
warm areas after shipment. The printer's design permits operation after
drying out and stabilizing at room temperature.
To Next Page
Loading...
Need help?
General
