7197 Series II Owner’s Guide Chapter 6: Commands
August 2011
164
Horizontal and vertical sizes are specified as ASCII value of received byte. They can be
obtained by following equations.
Horizontal size = Number of cells in Horizontal Direction × Symbol size specified by the
command 1D 28 6B 03 00 31 43 n
Vertical size = Number of cells in Vertical Direction × Symbol size specified by the
command 1D 28 6B 03 00 31 43 n
Example: If Symbol size is specified as 10 by the command of 1D 28 6B 03 00 31 43 n and
number of pixcel in horizontal direction is 21 then horizontal size will be 10 * 21=210. So
the printer’s output will be 37 36 32 31 30 1f 32 31 30 1f 31 1f 30 00
To Next Page
Loading...
