Desktop Repair 5-3
2. Remove the two cover screws shown in Figure Section 5-1.
Figure Section 5-1 Top Cover Screws
3. Slide the top cover toward the front about one inch.
4. Lift the top cover up and off (see Figure Section 5-2).
Figure Section 5-2 Removing the Top Cover
Expansion Board Removal
Remove any installed expansion board(s) using Figure Section 5-4 through Figure Section
5-7 and the following steps.
1. Remove the top cover as previously described.
2. Disconnect any cables leading from the expansion board(s).
Screws
To Next Page
Loading...
