6-4 Minitower Repair
4. Slide the top cover toward the rear about one inch (see Figure Section 6-3).
5. Lift the top cover up and aff the system unit.
Figure Section 6-3 Removing the Minitower Cover
Bottom Cover Removal
Remove the bottom access cover from the minitower system unit as follows.
1. Power off and unplug the keyboard, mouse, power cord and all other peripheral
cables attached to the system unit.
2. Place the system unit on its right side.
3. Remove the access cover screw shown in Figure Section 6-5.
To Next Page
Loading...
