NEC POWERMATE P60D - Desktop Lamps, Reset Button, and Power Button; Desktop Peripheral Connections

Setup and Operation 2-3
2. Connect the keyboard and mouse cables to the back of the system unit (see
Figure 2-2).
3. Connect the, monitor and any other peripherals to the rear panel (see Figure Sec-
tion 2-2). Detailed monitor connections a given in Sections 3, Options.
Figure Section 2-2 Desktop Peripheral Connections
4. Press the power button to power-on the system (see Figure Section 2-4). The user
lamps and reset button are also identified in the figure.
Figure Section 2-4 Desktop Lamps, Reset Button, and Power Button
Mouse
Port
Keyboard
Port
Serial
Port 1
Serial
Port 2
Parallel
Printer Port
15-Pin VGA
Monitor
Connector
Power
Lamp
Hard Disk Drive
Busy Lamp
Reset
Button
Power
Button