NEC Univerge SV9300 Series - Page 51

13. Enter the folder name where the
download file is stored.
Please refer to “APPENDIX B INPUT
CHARACTERS” on page 102 for how to
enter the character.
Input a folder name. A
120
BK Back OK
• Enter the name of the folder where the
files are stored in the server (including
path
from root directory to the folder that
stored backup file).
• Press
or Soft key (OK).
The display goes back to the [Account
Settings] screen.
14. Press or Soft key (Back).
3
Folder
↑ Back OK
15. Select “ Download Address”.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
.
1
Download Files
2
Download Address
↑ ↓ Back OK
16. Enter
an IP address/address (URI) of
the FTP/TFTP/HTTPS server which
stores the download file.
Enter the IP address of FTP/TFTP/HTTPS
server with digit keys. Use
for separator of
IP address.
‘*‘For‘.‘
0. 0. 0. 0
BK IP/URI Back OK
• After entering an IP address, press
or Soft key (OK).
The
display goes back to the [Download
Menu] screen.
To enter the address (URI) of FTP/TFTP/
HTTPS, press Soft key (IP/URI) to switch the
display to the URI input screen.
• Press Soft Key (IP/URI)
• By using the Dial keys, enter the address
(URI) of the server where the files are
stored.
‘*‘For‘.‘ A
BK IP/URI Back OK
Please refer to “APPENDIX B INPUT
CHARACTERS” on page
102 for how to
enter the character.
• After
entering addres (URI), press
or
Soft key (OK).
The
display goes back to the [Download
Menu] screen.
The IP address input screen can be switched
to
URI input screen by the Soft key (IP/URI).
‘*‘For‘.‘
0. 0. 0. 0
BK IP/URI Back OK
• Press Soft Key (IP/URI)
‘*‘For‘.‘ A
BK IP/URI Back OK
• Press Soft Key (IP/URI) again to go
back to the IP address input screen.
TERMINAL SETUP
43