NEC Univerge SV9300 Series - Page 52

17. Select “ Download Files”.
Select one of the following operations.
• Highlight an item by using , and press
, or Soft key (OK).
•
Press
.
1
Download Files
2
Download Address
↓ Back OK
18. Select a file to be downloaded.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
•
Press
or .
1
Hold Music
2
Ring Tone
↓ Back OK
According to the selected item in the
[Download Files], proceed to the following
steps below
.
• Select “
Hold Music” and go to Step
20.
• Select
“
Ring Tone” and go to Step
19.
" Ring Tone" is not available for ITY-6D/
6DG.
19. Select between Music Ring 1-3.
Select one of the following operations.
• Highlight
an item by using
, and press
, or Soft key (OK).
• Press
- .
1
Music Ring 1
2
Music Ring 2
↓ Back OK
20. Enter the file name with digit keys.
The default file name is displayed.
Input a file name. A
MOH.wav
BK Cancel Exec
Input a file name. A
Melody 1.wav
BK Cancel Exec
• Press Soft key (BK) once to delete the
default file name.
•
Enter the file name that is downloaded.
Please refer to “APPENDIX B INPUT
CHARACTERS” on page
102 for how to
enter the character.
Up to 20 characters can be entered as a file
name.
21. Press Soft key (Exec).
Downloading is started.
Downloading…
Saving…
[■ ]
After the downloading process is complete,
the display changes as follows.
Download Complete!
Exit
TERMINAL SETUP
44