Remote Access
AirCheck G3 supports remote access and control
using either a standalone VNC client or the Link-
Live Remote feature, which uses a VNC client
through the Link-Live website.
NOTE: The Link-Live Remote feature is only
available to customers with an active
AllyCare subscription. Your AirCheck G3 must
be claimed. See NetAlly.com/Support for
more information.
You can establish remote connections using the
Wi-Fi Test Port. However, the Management Port
provides a more stable link for remote control
because the test port may disconnect and
reconnect frequently.
See Test and Management Ports.
The top notifications are the quickest way to
find assigned IP addresses for your AirCheck G3
ports. Swipe down from the Status Bar to view
them.
Software Management
122
To Next Page
Loading...