which ports are used.) Discovery runs through
the enabled ports only if an active network link
is available. See Selecting Ports for explanations
of the different ports.
Extended Ranges
The Extended Ranges screen allows you to enter
addresses of non-local subnets on which you
want the Discovery process to run. Discovery
sweeps all of the enabled Extended Ranges for
devices, whether directly connected or off-net.
The AirCheck G3 performs Ping sweeps on
subnets that are not directly connected and ARP
sweeps on connected subnets.
When the SNMP agents are on a subnet that is
separate from the hosts (PC's and servers)
subnet, additional networks must be configured
for discovery:
l
The network address of the remote subnet
you want to discover, meaning the host (PC
and server) network.
Discovery App
428
To Next Page
Loading...