iPerf Settings
To run an iPerf test, you must configure your
CyberScope Air unit to communicate with your
iPerf endpoint. You can manually enter an iPerf
server address, or select a NetAlly Test
Accessory's address in the iPerf settings.
Saving Custom iPerf Settings
The iPerf app allows you to save a configuration
of settings for running an iPerf test to the same
endpoint later.
Tap the save icon to load, save, import, and
export configured settings. See Saving App
Settings Configurations for more instructions.
Once you save a settings configuration, the
custom name you entered appears at the top of
iPerf Test App
679
To Next Page
Loading...
Need help?
General
