Back to Title and Contents
When capture is running, the capture screen
displays the current file size as data is captured.
Slice Size: Tap this field to select a specific
frame slice size or enter a custom value. The
Slice Size setting limits how much of each
packet is captured. A smaller slice size is useful
when you are interested in the packet’s header
but do not need to see all the payload data. The
default is Full Packet.
Wi-Fi Filters
Channel: Tap the channel button to set the
channel on which packets are captured.
Channel Width: (Appears only if you select a
Channel number in the 5-GHz or 6-GHz band,
above channel 14). Tap to select a width of 20,
40, 80, or (for 6-GHz band only) 160 MHz.
BSSID/MAC: Enter a BSSID to capture only
packets going to or from the target device.
Control, Data, and Management Frames and
Beacons: All frame types are captured by
default. Tap the toggle button for each frame
type to disable its capture.
Capture App
336
To Next Page
Loading...