Capture Settings
The Capture app settings allow you to designate
file and slice sizes, and apply filters to capture
and analyze only certain packet types. For
example, you can create a Wi-Fi filter to capture
only packets to and from a particular AP or
client. When you open Capture from Home and
do not configure any filters, all packets from the
switch or channel are captured. The default Wi-
Fi capture saves the packets seen on channel1.
If you open the Capture app from another
NetAlly test app, Capture filters are auto-
matically applied. Filters that can be applied
from other apps include Wi-Fi Channel, Channel
Width, and BSSID.
For example, the floating action menu on the Wi-
Fi app's BSSID Details screen below contains the
option to start a Wi-Fi Capture.
Capture App
332
To Next Page
Loading...