SNMP Configuration
The MIB (Management Information Base) of
SNMP managed devices contains information
such as device configuration, interface con-
figuration and statistics, SNMP tables (like host
resource and route tables) and VLAN details.
Through the Discovery process, the AirCheck G3
interrogates MIBs to determine the device type,
ports, connected subnets, and other data.
SNMP credentials are required to communicate
with the SNMP agents on your interconnect
devices, such as switches and routers. The
Discovery Settings allow you to enter the SNMP
community strings and credential sets the
AirCheck G3 uses to communicate with those
devices.
SNMPv1/v2
Tap the toggle button to enable or disable
SNMPv1 and v2 queries. This setting is enabled
by default and uses the Community Strings
configured in the next setting.
Discovery App
434
To Next Page
Loading...