AutoTest Overview
AutoTest consists of three distinct testing levels:
Test Targets, Profiles, and Profile Groups. You
can create as many Profile Groups, Profiles, and
Test Targets as you need.
At the bottom level is a set of individual Test
Targets that connect to network services, such
as a web app or FTP site. A Test Target defines
parameters including type, target URL/IP
address, port number, and Pass/Fail thresholds.
More complex tests, like HTTP, allow further
Pass/Fail criteria, such as strings that must or
must not be contained in the HTTP body.
AutoTest App and Profiles
179
To Next Page
Loading...
Need help?
General
