netAlly AirCheck G3 - Selecting Ports

Test Port Notifications
Active network connections on the test ports are
established using the AutoTest app.
or The Wi-Fi Test Port status displays
with the wireless channel number under a Wi-Fi
or Link icon. Channels in the 6 GHz band display
with an E by the Wi-Fi or Link icon.
When the AirCheck G3 unit is dwelling
on a Wi-Fi channel (in this case channel 64),
the channel number is static. When the
AirCheck G3 is scanning for discovery, Wi-Fi
analysis, or air quality measurements, the
channel number changes dynamically to
show which channel is currently being
scanned.
Periodic AutoTest is running or has
completed. When Periodic AutoTest is running,
the Wi-Fi Test Port may not be available to other
testing apps.
General Settings and Tools
83