netAlly AirCheck G3 User Manual

Ping/TCP Settings
To configure a test, you can manually enter a
hostname or IP address in the settings, or you
can select Ping or TCP Connect from another
testing app's device screen.
Populating Ping/TCP from
Another App
When you open the Ping/TCP app from another
app, the address is pre-populated as the Ping or
TCP target device. For example, the floating
action button (FAB) menu on the Discovery app
screen shown below contains the option to open
the Ping/TCP app.
Ping/TCP Test App
634

netAlly AirCheck G3 Specifications

General

Brand	netAlly
Model	AirCheck G3
Category	Measuring Instruments
Language	English