such as high utilization, discards, or errors on all
discovered interfaces and device resources.
The selected time Refresh Interval is the
minimum time between each run of the Device
Health tests. Tap the field to disable Device
Health testing or to change the interval from the
default of 10 minutes to 30 or 60 minutes.
Disabling the Device Health testing affects the
types of Problems that Discovery can detect.
See also Problem Settings.
Nmap Tests
Tap this field to open the Nmap settings.
Run Test Against Each Device (Nmap
Section)
Tap this field to enable or disable Nmap tests to
run against each device discovered. (Shows or
hides the Nmap Test field.)
Nmap Tests
(Displayed only if the Nmap option for Run Tests
Against Each Device is enabled.)Tap this field to
open a selection list of Standard Nmap Tests.
Discovery App
467
To Next Page
Loading...
Need help?
General
