Subnet Mask
Tap this field to select a subnet mask. If you
select an already Discovered Subnet, the Subnet
Mask is also pre-populated.
ARP Sweep Rate
Tap the ARP Sweep Rate field to select a rate
between 5 and 100 ARP requests per second.
This setting can prevent the AirCheck G3 from
shutting down ports that sense too many ARPs
being sent.
Refresh Interval
This setting controls the time between runs of
the Discovery process. By default, Discovery runs
every 90 minutes. Tap the Refresh Interval field
to select a different interval, up to 8 hours.
The Manual option turns off regular automatic
Discovery, and the process refreshes only if you
select Refresh Discovery from the main
Discovery list screen.
Discovery App
433
To Next Page
Loading...