netAlly AirCheck G3 User Manual

1.Tap the Wi-Fi Bands and Channels option to
open the Wi-Fi Bands and Channels screen.
2.Tap the Wi-Fi band(s) option to open a
selection screen, and then enable all available
bands.
3. Tap the option for each frequency band to
open a selection screen, and then enable all
available channels for each band.
This process makes it easier to set up the Wi-Fi
Test Profiles, which you can limit to specific
channels, APs, SSIDs, etc. See AutoTest Wi-Fi
Profile for more information.
See General Settings for more information about
all General Settings options.
Management Port
Wi-Fi Management Port: The internal Wi-Fi
management port runs on the main system's 1x1
Dual-band 802.11ac + Bluetooth 5.0 wireless
adapter, which is configured in the system
Device Settings. See Connecting to Wi-Fi to
configure this connection.
The Wi-Fi management radio is set up by the
system network settings. The radio provides full
General Settings and Tools
80

netAlly AirCheck G3 Specifications

General

Brand	netAlly
Model	AirCheck G3
Category	Measuring Instruments
Language	English