netAlly AirCheck G3 - Page 140

G3 devices.
l
Do some setup before you begin.
l
Export the settings file(s) that you want to
share to Link-Live.
l
Use Link-Live to select other devices to
which you want to transfer the settings.
l
Use each selected unit to import the settings.
Before You Begin
l
Make sure that you have access to the
following:
a. The device from which you will get the
settings
b. A PC-based browser
c. The devices to which you will transfer
the settings file
l
Make sure that you have claimed and
updated the software for all AirCheck G3
devices to which you want to transfer the
settings. (You can use the Link-Live app or
web site to do the claiming. See Claiming the
Unit for instructions.)
Software Management
140