Profile name first, and then select the settings
icon.
NOTE: Tapping the settings icon on the main
AutoTest screen (shown above) opens the
AutoTest Settings and Profile Group screen,
not the individual Profile settings.
l
The default Air Quality Profile runs when
you tap START on the main AutoTest screen
or the Air Quality screen.
l
For the default Wi-Fi Profile to run suc-
cessfully, you must select an SSID and enter
security credentials before the AirCheck G3
can connect to a network.
See Wi-Fi Profile Connection Settings.
Adding New Profiles
To add new test profiles to the current AutoTest,
tap the floating action button (FAB) on the
AutoTest screen.
AutoTest App and Profiles
172
To Next Page
Loading...