Like the main AutoTest screen, Wi-Fi Profile tests
are summarized on cards. Tap a card to view
individual test screens.
Each test icon (except the AP) displays green,
yellow, or red to indicate the status (or grade) of
the completed test step: Success/Warning/Fail.
The AP Test card shows the name and SSID of
the connected AP. The AP test is not graded, so
the icon stays black.
Wi-Fi Profiles do not run automatically. The
factory default Wi-Fi Profile cannot run until you
have configured an SSID with the proper
credentials. (By default, AutoTest starts in Wi-Fi
passive scanning mode if you do not have a
profile set up.)
See the Wi-Fi Profile Settings topic for instruc-
tions.
After connecting to a network during a Wi-Fi
connection test, CyberScope Air remains
connected until you run another Wi-Fi or Air
Quality Profile or open the Wi-Fi app. Wi-Fi Test
AutoTest App and Profiles
206
To Next Page
Loading...
Need help?
General
