Ping/TCP app, over the Wi-Fi test port
connection while the Profile is linked.
Follow these steps to view the Response Time
graph:
1. Tap the blue PING hyperlink at the bottom
of the Link test screen. This opens the
Ping/TCP app with the Interface set to Wi-Fi
Port and Protocol set to Ping.
2. Access and adjust the Ping/TCP settings as
desired.
3. START the Ping or TCP Connect test.
4. Tap back to go back to the AutoTest Wi-
Fi Link screen. The Response Time graph
appears near the bottom of the screen and
AutoTest App and Profiles
208
To Next Page
Loading...