G3's internal file system.
1. Make the certificate file available on your
AirCheck G3 unit by saving it to a USB drive
inserted into your unit or by transferring to
the file system using a USB-C cable or email.
(See Managing Files for help.)
2. To run an AutoTest Wi-Fi Profile using
certificate authentication, set up the profile
with the following settings:
a. Authentication: WPA/WPA2/WPA3
Enterprise
b. Encryption: Auto
c. EAP Type: EAP TLS, PEAP TLS, or TTLS
EAP TLS
3. In AutoTest > Wi-Fi Connection settings, tap
the Certificate setting to open the Cer-
tificates screen.
AutoTest App and Profiles
228
To Next Page
Loading...