Signal Level Thresholds: Measured signal from
the AP
Signal-to-Noise (SNR) Thresholds: Ratio of
measured AP signal to noise level detected on
the channel
Retries Thresholds: Retry frames as a
percentage of total transmitted frames
Transmit Rate (TX) Thresholds: Measured rate
as a percentage of the AP's maximum
throughput rate
Alternate ID
Enter an Alternate IDif necessary. This is an
Advanced Authentication setting.
Channel Test Settings
Open Channel Test settings to configure
Utilization thresholds for the channel test
portion of the Wi-Fi profile.
AutoTest App and Profiles
236
To Next Page
Loading...