Air's internal file system.
1. Make the certificate file available on your
CyberScope Air unit by saving it to a USB
drive inserted into your unit or by trans-
ferring to the file system using a USB-C
cable or email. (See Managing Files for help.)
2. To run an AutoTest Wi-Fi Profile using
certificate authentication, set up the profile
with the following settings:
a. Authentication: WPA/WPA2/WPA3
Enterprise
b. Encryption: Auto
c. EAP Type: EAP TLS, PEAP TLS, or TTLS
EAP TLS
3. In AutoTest > Wi-Fi Connection settings, tap
the Certificate setting to open the Cer-
tificates screen.
AutoTest App and Profiles
239
To Next Page
Loading...
Need help?
General
