Gateway card does not appear on the main
AutoTest results screen, and the following
setting is hidden.
Timeout Threshold
The only other setting for the Gateway Test is
the timeout threshold, which indicates how long
the CyberScope Air waits for a response from the
gateway before grading the test as a fail. Tap the
field to select one of the value options, or enter
a custom value.
Reverse Grading
When Reverse Grading is enabled, a test is
considered successful if it fails and a failure if it
succeeds. The Results Codes section of the
results screen includes the message "Grading
has been reversed".
Gateway Test Results
CyberScope Air gets the Gateway's IP address
from DHCP or the static IP configuration, and
uses SNMP to acquire system group information
and statistics for the port that services the
AutoTest App and Profiles
272
To Next Page
Loading...
Need help?
General
