Timeout Threshold
This threshold controls how long the AirCheck
G3 waits for a response from the target before
failing the test.
Reverse Grading
When Reverse Grading is enabled, a test is
considered successful if it fails and a failure if it
succeeds. The Results Codes section of the
results screen includes the message "Grading
has been reversed".
For example, you might have a critical server
used by an accounting department. This server
must be accessible by the accounting VLAN but
not by any other networks. To verify the con-
figuration, you could set up a reverse-graded
Ping test, and then run a Wi-Fi AutoTest profile
to the server's guest SSID. The test reports a
ping failure, which is the desired outcome.
Ping Test Results
AutoTest App and Profiles
276
To Next Page
Loading...