Device Name
Enter the IP address or URL of the server you
want to ping. If you enter an IP address, the DNS
lookup portion of the test is skipped.
IP Protocol Version
IPv4 is used by default. Tap the field to switch
between IPv4 and IPv6.
Port
Specify the TCP port number for the AirCheck G3
to use to connect to the target.
Timeout Threshold
This threshold controls how long the AirCheck
G3 waits for a response from the target before
failing the test.
Reverse Grading
When Reverse Grading is enabled, a test is
considered successful if it fails and a failure if it
succeeds. The Results Codes section of the
results screen includes the message "Grading
has been reversed".
AutoTest App and Profiles
282
To Next Page
Loading...