Name
This field allows you to assign a custom name to
the test. The name appears on the target test
card in the profile.
Device Name
Enter the IP address or URL of the server you
want to ping. If you enter an IP address, the DNS
lookup portion of the test is skipped.
IP Protocol Version
IPv4 is used by default. Tap the field to switch
between IPv4 and IPv6.
Frame Size (bytes)
This setting specifies the total size of the
payload and the header sent. Valid sizes are 64
bytes to 1518 bytes. To test the Maximum Trans-
mission Unit (MTU) along a route to a target,
select the MTU frame size you want to test, and
set Do Not Fragment to Enabled.
Do Not Fragment
Tap the toggle button to enable.
AutoTest App and Profiles
286
To Next Page
Loading...
Need help?
General
