Air Quality test gradings are based on the
Thresholds configured in the Profile's settings. In
the case shown here, the Warnings and Failures
occurred because of high Utilization and Co-
channel Interference caused by the number of
APs active on the top three 2.4 GHz channels: 1,
6, and 11.
802.11 Utilization %: Percentage of the
displayed channel's capacity used by all 802.11
WLAN devices
Non-802.11 Utilization %: Percentage of the
displayed channel's capacity being used by non-
802.11 interferers, which may be non-WLAN
sources
AutoTest App and Profiles
312
To Next Page
Loading...