Nmap Test parameter screen, which lets you
edit the parameters for the test.
2. Use the Nmap Test screen to edit the
parameters for the test.
3. When you have changed any parameters
that you want, tap TEST. This opens the
Runner screen.
4. Tap the app settings icon to open the
Nmap Settings screen to edit the run
settings for this specific test. (This includes
specifying the target if a target is required
for the test.)
NOTE: You can tap the test name link to
return to the Nmap Test screen to edit
parameters.
5.
Tap the system Back icon to return to the
Runner screen.
6. Tap START. This runs the test with the
parameters and settings that you have
chosen.
Nmap App
348
To Next Page
Loading...
Need help?
General
