emailAddress=
admin@example.org
b. On the same server, create a user login
to access the enterprise server. For
example, with a FreeRADIUS server, you
would edit /etc/freeradius/users, locate
the section for "# The canonical testing
user", and then create the new user by
inserting 2 lines:
entuser1 Cleartext-Password
:= "randompw"
Reply-Message := "Hello, %
{User-Name}"
This creates a user login called
entuser1 with a password of
randompw.
Test Wi-Fi Management Using WPA2-E with
PEAP
1. Open the Settings app on your unit and
navigate to Network & internet.
2. Toggle the Wi-Fi button to On/Enabled.
3. Tap Wi-Fi to view available networks.
Home and System Interface
55
To Next Page
Loading...