1. Tap START to begin the survey.
2. A message displays the survey type, radio,
and Bluetooth status. This message appears
each time you begin or restart or return to
the survey from another app. Tap Dismiss to
remove the message.
3. To collect data, move around your site, and
tap the map at your current location to scan
the enabled wireless channels in that spot.
This displays a red circle on the floor plan.
o
Do not move from your location until the
data point on the screen turns from red
to green. (This takes only a few seconds
and shows when the scan is complete.)
AirMapper™ App
582
To Next Page
Loading...