2. Rename the certificate file, for example,
client.p12.
3. Copy the .p12 file to a USB thumb drive.
4. Transfer the USB thumb drive to your
CyberScope Air, and then copy the .p12 file
to the Downloads folder.
5. Open the Settings app.
6. Navigate to Security > Encryption &
credentials > Install a certificate > Wi-Fi
certificate. This opens the file picker.
7. Navigate to the Downloads folder, and
select the .p12 file that contains your client
certificate (for example, client.p12). A
message prompts you to enter the
password.
8. Enter the client certificate password to
extract the certificate.
9. Rename the certificate, for example,
FreeRadius client. A message confirms that
the Wi-Fi certificate has been installed.
Home and System Interface
61
To Next Page
Loading...
Need help?
General
