Back to Title and Contents
To test the Maximum Transmission Unit (MTU)
along a route to a target, select the MTU frame
size you want to test, and set the Do Not
Fragment setting (below) to Enabled.
Interval: (Appears only if the Ping Protocol is
selected.) Controls how much time passes
between each Ping sent from the CyberScope
Air. By default, Pings are sent once every second
(1 s). Tap a radio button to select a different
interval, or enter a Custom Value between 100
and 10,000 milliseconds.
Port: (Appears only if the TCP Connect Protocol
is selected.) Indicates the port number your
CyberScope Air uses to connect to the target
address for a TCP Port Open test. If needed, tap
the Port field to open a pop-up number pad and
enter a new port number. Tap OK to save it.
Timeout Threshold: This threshold controls how
long the CyberScope Air waits for a response
from the target before the test is failed.
Do Not Fragment: (Appears only if the Ping
Protocol is selected.) Tap the toggle button to
enable. See the Frame Size setting description
above.
Ping/TCP Test App
638
To Next Page
Loading...
Need help?
General
