NetApp AltaVault AVA400 - Managing the AltaVault appliance; Starting and stopping the AltaVault appliance

NetApp AltaVault Cloud Integrated Storage Administration Guide 113
CHAPTER 9 Managing the AltaVault appliance
This chapter includes the following sections:
 “Starting and stopping the AltaVault appliance” on page 113
 “Configuring scheduled jobs” on page 114
 “Managing licenses” on page 115
 “Upgrading your software” on page 117
 “Rebooting and shutting down AltaVault appliance” on page 118
 “Viewing the current user settings” on page 119
 “Managing configuration files” on page 119
Starting and stopping the AltaVault appliance
The AltaVault Storage Optimization Service is a daemon that executes in the background, performing operations when
required.
You can start, stop, and restart AltaVault Storage Optimization Service in the Maintenance > Service page. You can
also use this page to reset the service alarm after it has been triggered.
Restarting AltaVault service disrupts ingest sessions established with the AltaVault. This has the following impact:
 All shares (SMB, NFS, OST, and SnapMirror) will be unavailable and cloud connections will fail until the service
initializes again.
 Active backup jobs targeted at the appliance will fail and will need to be restarted after the Storage Optimization
Service is running again.
Note: Prior to stopping or restarting Storage Optimization Service, quiesce all backup applications.
To start, stop, or restart the Storage Optimization Service
1. Choose Maintenance > Service.
2. Click Stop, Start, or Restart.